Ibhentshi phezulu ngesantya esisezantsi igazi centrifuge TD-5Z

Inkcazelo emfutshane:

Ibhentshi ye-TD-5Z ephezulu yesantya esisezantsi se-centrifuge yegazi ingasetyenziselwa kwiinkalo ezininzi, ine-rotors eyi-8 kwaye iyahambelana ne-96 holes microplate, i-2-7ml i-vacuum yokuqokelela igazi ityhubhu kunye ne-tube 15ml, i-50ml, i-100ml.


  • Isantya esiphezulu:5000rpm
  • UMax Centrifugal Force:4650Xg
  • Ubukhulu besakhono:8*100ml(4000rpm)
  • Imoto:Eguquguqukayo frequency motor
  • Izinto zegumbi:304 intsimbi engatyiwayo
  • Isitshixo socango:Isivalo sokhuseleko se-elektroniki
  • Ukuchaneka kwesantya:±10rpm
  • Ubunzima:40KG
  • Iwaranti yeminyaka emi-5 yemoto;Iinxalenye ezitshintshiweyo zasimahla kunye nokuhanjiswa ngaphakathi kwewaranti

    Iimpawu kunye neenzuzo

    Uluhlu lwedatha

    Iirotors ezihambelanayo

    Iithegi zeMveliso


    I-TD-5Z yinkwenkwezi yethu ye-centrifuge.Kufanelekile kakhulu kwi-centrifuge 15ml, 50ml kunye ne-100ml ityhubhu kwisantya esiphantsi.Kwityhubhu eyi-15ml, inokuba ne-centrifuge kuninzi lweetyhubhu ezingama-32; Kwi-50ml okanye i-100ml ityhubhu, inokuba ne-centrifuge uninzi lweetyhubhu ezisi-8.Unokukhetha i-48 * 2-7ml ityhubhu ye-rotor yegazi ukuba i-centrifuge i-vacuum yokuqokelela igazi iityhubhu.

    1.Variable frequency motor, micro-computer controls.

    Kukho iintlobo ezintathu zemoto-iBrush motor, i-brushless motor kunye ne-variable frequency motor, eyokugqibela yeyona ilungileyo.Lizinga eliphantsi lokungaphumeleli, i-eco-friendly, ukugcinwa-free kunye nokusebenza kakuhle.Ukusebenza kwayo okulungileyo kwenza ukuba ukuchaneka kwesantya kufikelele kwi-± 10rpm.

    2.Wonke umzimba wentsimbi kunye negumbi le-304SS.

    Ukuqinisekisa ukusebenza okukhuselekileyo kunye nokwenza i-centrifuge yomelele kwaye yomelele, samkela ixabiso eliphezulu lentsimbi yentsimbi kunye ne-304 yensimbi engenasici.

    3.Isitshixo socango lokhuseleko lwe-elektroniki, olulawulwa yimoto ezimeleyo.

    Xa i-centrifuge iphantsi komsebenzi, kufuneka siqinisekise ukuba umnyango awuyi kuvuleka.Sisebenzisa isitshixo socango lwe-elektroniki, kwaye sisebenzise injini ezimeleyo ukuyilawula.

    4.RCF inokusetwa ngokuthe ngqo.

    Ukuba siyazi i-Relative Centrifugal Force ngaphambi kokusebenza, sinokuseta i-RCF ngokuthe ngqo, akukho mfuneko yokuguqula phakathi kwe-RPM kunye ne-RCF.

    5.Ingakwazi ukuseta kwakhona iiparamitha phantsi kokusebenza.

    Ngamanye amaxesha kufuneka siphinde silungise iiparameters ezifana nesantya, i-RCF kunye nexesha xa i-centrifuge iphantsi komsebenzi, kwaye asifuni ukuyeka, sinokuseta kwakhona iiparitha ngokuthe ngqo, akukho mfuneko yokuyeka, sebenzisa nje umnwe wakho ukutshintsha loo manani.

    6.10 amanqanaba okukhawuleza kunye nereyithi yokunciphisa.

    Usebenza njani umsebenzi?Seta umzekelo, sibeka isantya se-5000rpm kwaye cinezela iqhosha elithi QALA, emva koko i-centrifuge iya kukhawuleza ukusuka ku-0rpm ukuya ku-5000rpm.Ukusuka kwi-0rpm ukuya kwi-5000rpm, ngaba singayenza ukuba ithathe ixesha elincinci okanye ixesha elingakumbi, ngamanye amagama, ukubaleka ngokukhawuleza okanye ngokukhawuleza?Ewe, le nkxaso ye-centrifuge.

    7.Ukuxilongwa kwempazamo ngokuzenzekelayo.

    Xa impazamo ibonakala, i-centrifuge iyakuxilonga ngokuzenzekelayo kwaye ibonise i-ERROR CODE kwisikrini, ngoko uya kwazi ukuba yintoni ingxaki.

    I-8.Ingakwazi ukugcina iinkqubo ze-100.

    Ekusetyenzisweni kwemihla ngemihla, sinokudinga ukuseta iiparamitha ezahlukeneyo ngeenjongo ezahlukeneyo, sinokugcina ezo zicwangciso zokuseta njengeenkqubo zokusebenza.Ngexesha elizayo, kufuneka sikhethe inkqubo elungileyo kwaye emva koko siqale.


  • Ngaphambili:
  • Okulandelayo:

  • Isantya esiphezulu 5000rpm
    UMax Centrifugal Force 4650Xg
    Umthamo omkhulu 8*100ml(4000rpm)
    Ukuchaneka kwesantya ±10rpm
    Uluhlu lwexesha 1min-99min59s/intshing
    Ingxolo ≤60dB(A)
    Ukunikezwa Amandla I-AC 220V 50HZ 10A
    Ubungakanani 550*430*350mm
    Ubunzima 40kg
    Amandla 500W
    Imoto Eguquguqukayo frequency motor
    I-RCF inokumiselwa ngokuthe ngqo Ewe
    Iseta kwakhona iiparamitha zokusebenza Ewe
    Inokugcina iinkqubo Iinkqubo ezili-100
    Ukukhawulezisa okunokulungiswa kunye nesantya sokunciphisa Amanqanaba ali-10
    Ukuxilongwa kwempazamo ngokuzenzekelayo Ewe
    Bonisa Umboniso wedijithali
    Isitshixo socango Isitshixo socango sokhuseleko lwe-elektroniki
    Izinto zomzimba Intsimbi
    Izinto zegumbi 304 intsimbi engatyiwayo
    Iirotors ezihambelanayo 8 rotors

    38.TD-5Z

    Bhala umyalezo wakho apha kwaye uwuthumele kuthi